Abstract The roughness and the purity of implant surfaces are key points in the osteointegration process. The surfaces obtained by classic methods present irregular non-reproducible patterns and furthermore contaminate the implant surface with materials other than titanium which interfere with the process of osteointegration. The aim of the present study is to evaluate, by SEM/EDX and XPS analyses, the surface microstructure and the purity of new laser-treated implant surfaces. The laser treatment of the surface allows to set parameters to determine the roughness in order to obtain a regular and repeatable surface. Furthermore, there being no contact between the implant and the machine, there is no surface contamination with elements other than titanium. In this study we used a diode-pumped solid state laser (DPSS) with Nd:YAG source operating in Q-Switching mode on titanium samples. The resulting samples were analysed by SEM/EDX and XPS to evaluate morphology and purity of the surface. The results show surfaces with very regular roughness and a total absence of contamination.

Evaluation of a new laser surface implant: scanning electron microscopy/energy dispersive X-ray and X-ray photoelectron spectroscopy analyses.

PERFETTI, Giorgio
2008-01-01

Abstract

Abstract The roughness and the purity of implant surfaces are key points in the osteointegration process. The surfaces obtained by classic methods present irregular non-reproducible patterns and furthermore contaminate the implant surface with materials other than titanium which interfere with the process of osteointegration. The aim of the present study is to evaluate, by SEM/EDX and XPS analyses, the surface microstructure and the purity of new laser-treated implant surfaces. The laser treatment of the surface allows to set parameters to determine the roughness in order to obtain a regular and repeatable surface. Furthermore, there being no contact between the implant and the machine, there is no surface contamination with elements other than titanium. In this study we used a diode-pumped solid state laser (DPSS) with Nd:YAG source operating in Q-Switching mode on titanium samples. The resulting samples were analysed by SEM/EDX and XPS to evaluate morphology and purity of the surface. The results show surfaces with very regular roughness and a total absence of contamination.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11564/133040
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact